multi-functional oil Drainer
To meet the market varied needs, Cnjacks make 3 different types of oil drainers: standard oil drain, oil drainer with pump and air evacuation oil drain.
Cnjacks Standard Oil Drains use traditional method for handling waste oil, allowing gravity to drain fluids from vehicles into a portable or mobile fluid drain, these fluids are then gravity fed info a used fluid storage tank.
Instead of gravity draining fluids into a storage tank, Cnjacks Oil Drain with Pump use a suction pump system to evacuate the fluid into the tank.
Cnjacks Air Evacation Oil Drains employ the benefits of the drain and ecacuate system without an evacuation pump. The fluid drain is air pressured to evacuate the used oil.
Model Nr.: Multi-Functional Oil Drainer-ODTE
Specs.:
Sucking speed: 0.6-1.6L/min
Collecting height: 1.85m
Work pressure: 7-8ba
Tank volume: 65L
Volume of measuring cup: 9L
Draining pressure: 0.5bar
Length of suction pipe: 1.4m
Length of drainpipe: 1.9m
Total sucking capacity: 40-50L
Total weight: 32kgs
Exterior dimension: 480x500x1850mm
The multi-functional oil drainer has three functions: sucking, collecting and filling oil.
Fuctions:
It is easy used to drain oil in low pressure.
The oil drainer makes use of compressed air as power to produce vacuum in order to achieve its sucking function.
It is a safe, convenient and quick machine. It never bring spark to you.
This machine is mainly used in garage, cars beautification, and cars producing etc.
It can collect and fill oil for cars or other machines to achieve its fixed or movable working functions.
The movable body could meet your needs of using it in different places at any time.
The outside-layed cursor shows you the height of oil clearly.
The adjustable oil tray adapts to any types of cars.
Trashy oil can be sucked by minus pressure that is produced by air, and also can be collected by gravity.
Each machine is equipped with different specifications of nozzles.
The transparent visual measuring cup is convenent to observe oil.
The tool tray can be disassembled.
Notice:
The temperature must be below 70-80 when draining oil.
The highest pressure is 0.5bar when draining oil.
Never use it for corrosive products.