Gear Puller
Gear and bearing pullers are designed for hundreds of applications. Their main purpose is to remove a component, such as a gear, pulley or bearing from a shaft, or to remove a shaft from inside a hole. If you need bearing and gear pullers, you should take a look at our Cnjacks selection of gear pullers including manual gear pullers and hydraulic pullers as well showed below.
Model Nr.: Gear Puller_GP0401
Gear Puller, 2 jaws
Carbon Steel, Zinc-Plated, Jaws Drop-forged, Triangular Thread.
Jaw Size | PCS/CTN | CTN Size | N.W. | G.W. | 20' Container | |
3" | 15-80mm | 50pcs | 41x21.5x15.5cm | 12kgs | 14kgs | 71500pcs |
4 | 20-120mm | 40pcs | 39x26.5x15.5cm | 19kgs | 21kgs | 38000pcs |
6 | 25-160mm | 30pcs | 41x37x18.5cm | 30kgs | 32kgs | 18750pcs |
8 | 30-210mm | 12pcs | 52x25x20cm | 23kgs | 25kgs | 9600pcs |
10 | 40-260mm | 8pcs | 40x31x23cm | 25kgs | 27kgs | 5900pcs |